Home

Company Profile

Product

New Product

Contact Us

              Polyethersulfone Membrane Filter Cartridge

Filter Bag
Liquid Filter

   Polyethersulfone membrane filter the media is the mirrored asymmetric 
Air Filter    structure that  ensure lower pressure drop at high flow rate and extended 
Housing    service life.
Plastic      Polyethersulfone membrane filter constructed with polypropylene support and 
Stainless Steel    core has excellent chemical resistance and hydrophilization is widely use in 
Contact Us    BOE etchant, DI water circulated filtration of semiconductor industry 
   and photoelectric industry and the terminal fine filtration of general
   food and beverage factory.
Features of Product:
   Polyethersulfone membrane is permanently hydrophilic membrane 
      without use of addition, surface active agent or post-treatments
   Available pore size rating 0.04 micron ~ 1.2 micron
   The highly porous asymmetric membrane that ensure lower 
      pressure drop, greater through-put, and extended service life
   0.55m2 of filtration area, low pressure drop and high flow rate.
   The filter element is manufactured in clean room.
   Pre-flush 30 minutes with 18M - Ω DI water/2GPM, TOC 
        content is lower than 40ppb
   Assurance of product integrity test and effectiveness in operation
   Certificated by FDA 
   End Caps and connectors are sealed by thermal bond, free binder
Applications of Product:
   Filtration of  photoelectric industry of Clean, Rinse
   BOE, photoelectric of filtration 
   Terminal fine filtration of DI water system
   Terminal fine filtration of food and beverage   
Operation Conditions:
   Maximum operating forward pressure drop : 80°C: 1.7 kg/cm2
: 20°C: 5.5 kg/cm2
   Maximum operating temperature : 80°C
   Sterilization : Autoclave  : 121°C, 30 min, 10 times
: Steam      : 121°C, 30 min, 10 times
: Hot water : 80°C, 30 min,10 times
Product Specifications:
   Membrane : Polyethersulfone membrane
   Micron Rating (Absolute) : 0.04 um, 0.1um, 0.2um, 0.45um, 0.65um,1.2 um
   Supports : Polypropylene
   End Cap & Core : High Strength PP
   O-ring Material : EPDM, Buan N, Silicone, Viton, Viton encapsulated PFA
   Filtration area : > 0.55 m2
   Length :10", 20", 30", 40"
   Inner diameter : 28 mm 
   Outer diameter : 69 mm

Spec Literature

 

 

 

Copyright © 2005 Macpure System.  All Rights Reserved.