liquid filter

Product

Filter Bag

Liquid Filter

Air Filter

Plastic Housing

Stainless Steel Housing

New Product

Nylon Membrane Filter Cartridge

Nylon membrane filter feature a naturally hydrophilic polyamide. Nylon

membrane with a narrow pore size distribution and high porosity at the specified

Housing

pore size rating. Nylon membrane filter are suitable for sub-micro filtration

Plastic

of a wide range of process liquid, in application where the characteristics of a

naturally hydrophilic membrane are required.

Contact Us

	Features of Product:
	Excellent hydrophilization, no prewetting required.
	0.9m² of filtration area, low pressure drop and high flow rate.
	Manufactured in clean room, highly clean cartridge.
	Integrity test is available
	Pre-flush with 18 Megohm-cm DI water, TOC content is
	lower than 40 ppb.
	End caps and connectors sealed by thermal bond, free of binder.
	Certified by FDA


	Applications of Product:
	Terminal fine filtration of DI water system.
	Filtration of base solutions, solvents and photoresists of
	LCD factory.


	Operation Conditions:
	Maximum operating pressure drop	: 95°C: 1.4 kg/cm²
		: 60°C: 1.4 kg/cm²
		: 20°C: 5.6 kg/cm²
	Maximum operating temperature	: For Chemical filtration: 60°C
		For Food & Beverage, DI water : 95°C


	Product Specifications:
	Membrane	: Nylon membrane
	Micron Rating (Absolute)	: 0.1um, 0.2um, 0.45um, 0.65um,1um
	Supports	: Polypropylene
	End Cap & Core	: High Strength PP
	O-ring Material	: EPDM, Buan N, Silicone, Viton, Viton encapsulated PFA
	Filtration area	: > 0.9 m²
	Length	: 10", 20", 30", 40"
	Inner diameter	: 28 mm
	Outer diameter	: 69 mm