liquid filter

Product

Filter Bag

Liquid Filter

Air Filter

Plastic Housing

Stainless Steel Housing

New Product

Nominal Melt-blown Depth Filter

This series of nominal depth filter are constructed from 100% melt blown micro-denier

Polypropylene.

Housing

The two layer structure design with fine fibers in the inner layer and coarse fiber

Plastic

on the outer layer is to filter different diameter of dust in different layer.

The outer pre-filter can contain more impurities and reduce filtering resistance.

Contact Us

The inner filter layer can filter smaller particle and harmful substances.

	Features of Product:
	Two-layers structure cartridge provide, high contaminant holding
	capacity and longer service life.
	Micro-denier melt-blown filtration fiber, high removal ratings.
	100% PP for compatibility with a wide range of process fluids.
	Formed by thermal bond without use of any binders and adhesives
	Certificated by NSF 42 and FDA CFR title 21


	Applications of Product:
	Electroplating, etching and image development processes in
	PCB industry
	Filtration of electroplating fluid in conventional electroplating
	industry.
	Pre-filter of DI & RO water filtration system for industry
	Filtration of medium & low viscosity fluid of chemical.
	Filtration of water for manufacturing processes and recycled water.



	Operation Conditions:
	Maximum operating forward pressure drop	: 80°C: 1.2 kg/cm²
		: 60°C: 2.1 kg/cm²
		: 20°C: 4.2 kg/cm²
	Maximum operating temperature	: 80°C
	Recommended replaceable pressure drop	: 2.1 kg/cm²

	Product Specifications:
	Membrane	: 100% melt-blown micro-denier PP fiber
	Micron Rating ( Nominal)	: 0.5um, 1um, 3um, 5um, 10um, 25um,
		50um, 75um, 100um
	Length	: 9.87", 10", 20", 30", 40"
	Inner diameter	: 28 mm
	Outer diameter	: 63 mm